Cisco Cisco Packet Data Interworking Function (PDIF)
OSPF Configuration Mode Commands
ospf router-id ▀
Command Line Interface Reference, StarOS Release 16 ▄
7339
ospf router-id
This command configures the router ID for the OSPF process.
Product
PDSN
HA
GGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > OSPF Configuration
configure > context context_name > router ospf
Entering the above command sequence results in the following prompt:
[local]host_name(config-ospf)#
Syntax
[ no ] ospf router-id ip_address
no
Disables the router ID for the OSPF process.
router-id
ip_address
Specifies the router ID for the OSPF process.
ip_address
is entered using IPv4 dotted-decimal notation.
Usage
Use this command to set the router ID for the current OSPF router process.
Example
The following command sets the router ID to
192.168.200.1
:
ospf router-id 192.168.200.1