Cisco Cisco Packet Data Interworking Function (PDIF)
PCC-Action-Set Configuration Mode Commands
terminate-session ▀
Command Line Interface Reference, StarOS Release 16 ▄
7427
terminate-session
This command sets an action to terminate a Bearer based on bearer-id or unique combination of QCI and ARP received
through current CCR message in PCC-Action-Set configuration for PCC-Service instance.
through current CCR message in PCC-Action-Set configuration for PCC-Service instance.
Product
IPCF
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > PCC Service Configuration > PCC Action-Set Configuration
configure > context context_name > pcc-service service_name > action-set action_set_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-pcc-action-set)#
Syntax
[no] terminate-session
no
Removes the action to terminate a Bearer based on bearer-id from a PCC-Action-Set configuration instance
for PCC-Service configuration.
for PCC-Service configuration.
Usage
Use this command to set an action to terminate a Bearer based on bearer-id or unique combination of QCI
and ARP received through current CCR message in PCC-Action-Set configuration for PCC-Service instance.
Termination of Bearer is possible only in case of PCRF binding and limited to Dynamic rules.
and ARP received through current CCR message in PCC-Action-Set configuration for PCC-Service instance.
Termination of Bearer is possible only in case of PCRF binding and limited to Dynamic rules.
Important:
This action is only applicable to IP-CAN sessions with access type as GPRS. When terminate Bearer
is initiated, IPCF triggers Bearer Termination Procedure for the bearer-id received through current CCR message.
Caution:
This command triggers termination of Gx and SPR sub session active under PCC-Service instance.
Example
The following command sets an action to terminate a Bearer based on bearer-id received through current
CCR message under PCC-Action-Set configuration instance for PCC-Service configuration:
CCR message under PCC-Action-Set configuration instance for PCC-Service configuration:
terminate-session