Cisco Cisco Packet Data Interworking Function (PDIF)
PDG Service Configuration Mode Commands
plmn id ▀
Command Line Interface Reference, StarOS Release 16 ▄
7675
plmn id
Configures location specific mobile network identifiers used to help translate local emergency and service-related
numbers. Default is disabled.
numbers. Default is disabled.
Product
PDG/TTG
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > PDG Service Configuration
configure > context context_name > pdg-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-pdg-service)#
Syntax
plmn id mcc mcc_number mnc mnc_number
no plmn id mcc mcc_number mnc mnc_number
mcc
mnc_number
Specifies the mobile country code (MCC) portion of the PLMN identifier as an integer from 200 through 999.
mnc
mnc_number
Specifies the mobile network code (MNC) portion of the PLMN identifier as a 2- or 2-digit integer from 00
through 999.
through 999.
no plmn id mcc
mcc_number
mnc
mnc_number
Removes a previously configured PLMN identifier for the PDG service.
Usage
The PLMN ID is included in the RAI (Routing Area Identity) field of the PDP Create Request messages sent
to the GGSN. Multiple PDG services can be configured with the same PLMN identifier. Up to five PLMN
IDs can be configured for each PDG service.
to the GGSN. Multiple PDG services can be configured with the same PLMN identifier. Up to five PLMN
IDs can be configured for each PDG service.
Example
The following command configures the PLMN identifier with an MCC of
462
and MNC of
2
:
plmn id mcc 462 mnc 02