Cisco Cisco Packet Data Interworking Function (PDIF)
PDIF Service Configuration Mode Commands
▀ aaa attribute
▄ Command Line Interface Reference, StarOS Release 16
7678
aaa attribute
Sets the system attributes for AAA messages.
Product
PDIF
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > PDIF Service Configuration
configure > context context_name > pdif-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-pdif-service)#
Syntax
aaa attribute { 3gpp2-bsid string | 3gpp2-service-option integer | calling-station-id
integer | 3gpp2-serving-pcf ip-address }
integer | 3gpp2-serving-pcf ip-address }
no aaa attribute
default aaa attribute 3gpp2-service-option integer
no
Removes a previously configured AAA attribute.
default
Returns the specified aaa attribute to the original default system settings.
3gpp2-bsid
string
Specifies the base-station ID and consists of the SID + NID + CELLID.
string
must contain 12 hexadecimal upper-case ASCII characters.
3gpp2-service-option
integer
Specifies the radius attribute value when sending authentication and accounting messages as an integer from
0 through 32767. Default: 4095
0 through 32767. Default: 4095
calling-station-id
integer
Specifies the calling station phone number as a sequence of 1 through 15 digits.
3gpp2-serving-pcf
ip-address
Use this command to generate attribute values without creating a new ASR 5000ASR 5500 image.