Cisco Cisco Packet Data Interworking Function (PDIF)
PDSN Service Configuration Mode Commands
▀ dormant-transition
▄ Command Line Interface Reference, StarOS Release 16
7718
dormant-transition
Configures the PDSN behavior to terminate A10 session, when the PDSN receives the A11-RRQ (Type 4) before the
session for the original MN is established completely.
session for the original MN is established completely.
Product
PDSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > PDSN Service Configuration
configure > context context_name > pdsn-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-pdsn-service)#
Syntax
[ no | default ] dormant-transition initial-session-setup
no
Terminates the A10 session, when PDSN receives the A11-RRQ (Type 4) before the original session
established completely.
established completely.
default
Keeps the A10 session live in case of A11-RRQ (Type 4) is received before the original session is established
completely.
completely.
Usage
When the status of A10 session goes to dormant before the session for the original MN is established
completely, the different MN may possibly send the A11-RRQ (Type 4) to the PDSN and PPP renegotiation
may start.
This command is used to terminate the A10 session when the PDSN receives the A11-RRQ (Type 4) before
the session for original MN is established completely.
completely, the different MN may possibly send the A11-RRQ (Type 4) to the PDSN and PPP renegotiation
may start.
This command is used to terminate the A10 session when the PDSN receives the A11-RRQ (Type 4) before
the session for original MN is established completely.
Example
Following command is used to release the A10 session in case of receiving A11-RRQ (Type 4) before the
original session is established completely:
original session is established completely:
no dormant-transition initial-session-setup