Cisco Cisco Packet Data Interworking Function (PDIF)
PDSN Service Configuration Mode Commands
▀ ip header-compression rohc
▄ Command Line Interface Reference, StarOS Release 16
7728
ip header-compression rohc
Enters PDSN Service ROHC Configuration Mode and allows you to configure ROHC parameters that the PDSN
conveys to the PCF in the initial A11 RRP message before PPP authentication.
conveys to the PCF in the initial A11 RRP message before PPP authentication.
By default, ROHC is disabled for a PDSN service.
Product
PDSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > PDSN Service Configuration
configure > context context_name > pdsn-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-pdsn-service)#
Syntax
ipheader-compression rohc
default ipheader-compression rohc
no ipheader-compression rohc
default
Sets all PDSN Service ROHC Configuration Mode values back to the defaults and disable ROHC for this
PDSN service.
PDSN service.
no
Disable IP header compression for this PDSN Service.
Usage
Use this command to enter the PDSN Service ROHC Configuration Mode or disable ROHC for the current
PDSN service.
PDSN service.
Example
The following command disables ROHC for the current PDSN service and sets all of the values for
commands in PDSN Service ROHC Configuration Mode back to their default settings:
commands in PDSN Service ROHC Configuration Mode back to their default settings:
no ip header-compression rohc