Cisco Cisco Packet Data Interworking Function (PDIF)
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
P-GW Service Configuration Mode Commands
▀ dns-client
▄ Command Line Interface Reference, StarOS Release 16
7818
dns-client
Specifies the DNS client context to use for sending DNS queries.
Product
P-GW
SAEGW
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > P-GW Service Configuration
configure > context context_name > pgw-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-pgw-service)#
Syntax
dns-client context name
[ default | no ] dns-client context
default
Returns the command to the default setting of targeting the DNS client in the context where the P-GW service
resides.
resides.
no
Disables DNS queries.
context name
Specifies the name of the context where the DNS client is used for the resolution of PCSCF-FQDN received
from S6b interface.
from S6b interface.
name
must be an existing context expressed as an alphanumeric string of 1 through 79 characters.
Usage
Use this command to specify the context where the DNS client resides to perform P-CSCF-FQDN resolution
from the S6b interface.
from the S6b interface.
Example
The following command identifies the
egress1
context as the context where the DNS client resides:
dns-client context egress1