Cisco Cisco Packet Data Interworking Function (PDIF)
P-GW Service Configuration Mode Commands
fqdn ▀
Command Line Interface Reference, StarOS Release 16 ▄
7823
fqdn
Configures a Fully Qualified Domain Name for this P-GW service used in messages between the P-GW and a 3GPP
AAA server over the S6b interface.
AAA server over the S6b interface.
Product
P-GW
SAEGW
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > P-GW Service Configuration
configure > context context_name > pgw-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-pgw-service)#
Syntax
fqdn host domain_name realm realm_name
[ default | no ] fqdn
default
Returns the command to the default setting of “null”.
no
Removes the configured FQDN from this service configuration.
host domain_name
Specifies the domain name of the P-GW service.
domain_name
must be an alphanumeric string of 1 through 255 characters.
realm realm_name
Specifies the realm name of the P-GW service.
realm_name
must be an alphanumeric string of 1 through 255 characters.
Usage
Use this command to identify the P-GW service using an FQDN required when sending messages over the
S6b interface to a 3GPP AAA server.
S6b interface to a 3GPP AAA server.
Important:
In order to properly interact with other nodes in the network, the FQDN should be less than or equal
to 96 alphanumeric characters.