Cisco Cisco Packet Data Interworking Function (PDIF)
P-GW Service Configuration Mode Commands
▀ newcall
▄ Command Line Interface Reference, StarOS Release 16
7826
newcall
Configures the P-GW to accept or reject requests for a static IP address if the address is already in use by another
session.
session.
Product
P-GW
SAEGW
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > P-GW Service Configuration
configure > context context_name > pgw-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-pgw-service)#
Syntax
newcall duplicate-subscriber-requested-address { accept | reject }
no newcall duplicate-subscriber-requested-address
no
Returns the command to the default setting of “reject”.
duplicate-subscriber-requested-address { accept | reject }
Default:
reject
accept
: Specifies that the old session with the requested address will be ended to accept the new session
with the same address.
reject
: Specifies that the new session requesting the same address will be rejected.
Usage
Use this command to configure the behavior of the P-GW service when receiving requests for static IP
address already in use by other sessions.
address already in use by other sessions.
Important:
This command is only applicable to sessions using services supporting duplicate address abort. These
services include HA, GGSN, and P-GW.
Example
The following command allows for the acceptance of requests for static IP addresses already in use by other
sessions:
sessions:
newcall duplicate-subscriber-requested-address accept