Cisco Cisco Packet Data Interworking Function (PDIF)
RNC Configuration Mode Commands
pointcode ▀
Command Line Interface Reference, StarOS Release 16 ▄
7987
pointcode
Configures the point code of the RNC.
The access protocol that is part of the IuPS Service configuration mode must be configured prior to defining the RNC’s
point code.
point code.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > luPS Service Configuration > RNC Configuration
configure > context context_name > iups-service service_name > rnc id rnc_id
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ctx-iups-service-rnc)#
Syntax
pointcode pt_code
no pointcode
no
Deletes the RNC’s point code information from the system configuration.
pt_code
Point code in dotted-decimal format :
ITU Range 0.0.1 to 7.255.7
ANSI Range 0.0.1 to 255.255.255
TTC Range 0.0.1 to 15.31.255
string of 1 to 11 characters
Usage
Use this command to identify the point code of the associated RNC.
Example
Identify the pointcode for this RNC as
1.234.2
:
pointcode 1.234.2