Cisco Cisco Packet Data Interworking Function (PDIF)
RNC Configuration Mode Commands
▀ reset-resource
▄ Command Line Interface Reference, StarOS Release 16
8010
reset-resource
This command enables the operator to control message length by configuring the number of IuConIDs sent in each
RANAP Reset Resource messages.
RANAP Reset Resource messages.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > luPS Service Configuration > RNC Configuration
configure > context context_name > iups-service service_name > rnc id rnc_id
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ctx-iups-service-rnc)#
Syntax
reset-resource max-iuconid-per-msg number
default reset-resource max-iuconid-per-msg
default
Resets the number of Iu connection Ids included in the Reset Resource messages. Default is 250.
max-iuconid-per-msg number
Sets the number of Iu connection Ids to be included in the Reset Resource messages.
number
: Integer from 1 to 250.
Default: 250
Usage
Id numbers for each Iu connection are included in the RANAP Reset Resource messages. Including this
potentially long stream of numbers can make the message very long. With this command, the operator can
control the size of the messages by controlling the number of Id messages included in the messages.
potentially long stream of numbers can make the message very long. With this command, the operator can
control the size of the messages by controlling the number of Id messages included in the messages.
Example
Limit the number of Iu connection IDs to
30
:
reset-resource max-iuconid-per-msg 30