Cisco Cisco Packet Data Interworking Function (PDIF)
Route-map Configuration Mode Commands
match community ▀
Command Line Interface Reference, StarOS Release 16 ▄
8083
match community
Configures filtering (permit or deny) via a BGP community-list in a route map.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Route-map Configuration
configure > context context_name > route-map map_name { deny | permit }
seq_number
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-route-map)#
Syntax
[no] match community { named named_list | standard identifier }
no
Disables matching the specified community list.
named
named_list
Specifies the name of a community list as an alphanumeric string of 1 through 79 characters.
standard
identifier
Specifies the name of a community list as an integer from 1 through 99.
Usage
Configures filtering (permit or deny) via a BGP community-list in a route map.
The community list must have been previously configured via the Context Configuration mode ip
community-list command.
The community list must have been previously configured via the Context Configuration mode ip
community-list command.
Example
This command matches community-list number 2:
match community standard 2