Cisco Cisco Packet Data Interworking Function (PDIF)
SCCP Network Configuration Mode Commands
▀ destination
▄ Command Line Interface Reference, StarOS Release 16
8156
destination
This command configures the SCCP network destination information. Use this command multiple times to set all of the
destination information required.
destination information required.
Product
SGSN
HNB-GW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > SCCP Network Configuration
configure > sccp-network id_number
Entering the above command sequence results in the following prompt:
[local]host_name(config-sccp-network-sccp_id)#
Syntax
destination dpc pt_code { name route_name | next-hop pt_code [ priority priority ] | ssn
subsys_num | version sccp_ver }
subsys_num | version sccp_ver }
no destination dpc p_code [ name route_name | ssn ssn_num | version sccp_ver ]
no
Deletes the specified destination information from the SCCP network configuration.
dpc pt_code
Specifies the SCCP destination point code.
pt_code:
Must be in SS7 point code dotted-decimal ###.###.### format or decimal ######## format.
name route_name
The name of the SCCP destination route.
route_name:
enter an alphanumeric string from 1 through 64 characters in length.
next-hop pt_code
[ priority priority
Associates the next destination defined in the SS7 routing domain and assigns the next-hop a priority for use.
pt_code:
Must be in SS7 point code dotted-decimal ###.###.### format or decimal ######## format.
priority:
Must be an integer from 0 to 15, with 0 setting the highest priority.
ssn subsys_num
The destination subsystem number.
subsys_num:
enter an integer from 1 through 255.
version sccp_ver
sccp_ver:
enter one of the following to select the SCCP variant: