Cisco Cisco Packet Data Interworking Function (PDIF)
SCTP Parameter Template Configuration Mode Commands
sctp-max-out-strms ▀
Command Line Interface Reference, StarOS Release 16 ▄
8177
sctp-max-out-strms
Configures the maximum number of outgoing SCTP streams.
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > SCTP Parameter Template Configuration
configure > sctp-param-template template_name
Entering the above command sequence results in the following prompt:
[local]host_name(sctp-param-template)#
Syntax
sctp-max-out-strms value
default sctp-max-out-strms
default
Returns the command to its default setting of 2.
value
Specifies the maximum number of outgoing SCTP streams as an integer from 1 through 16.
MME Default 16.
SGSN Default: 2.
MME Default 16.
SGSN Default: 2.
Usage
Use this command to configure the maximum number of outgoing SCTP streams.
The MME restricts the allowable range as 2-16. If a value of 1 is entered, value 2 will be applied for any
MME service associated with this SCTP parameter template.
For the SGSN, if the user tries to configure the value of
The MME restricts the allowable range as 2-16. If a value of 1 is entered, value 2 will be applied for any
MME service associated with this SCTP parameter template.
For the SGSN, if the user tries to configure the value of
sctpmax-out-strms
less than "2", a message is
displayed and the default value is set.
Example
The following command configures the maximum number of outgoing SCTP streams to
5
:
sctp-max-out-strms 5