Cisco Cisco Packet Data Interworking Function (PDIF)
SCTP Parameter Template Configuration Mode Commands
▀ sctp-rto-initial
▄ Command Line Interface Reference, StarOS Release 16
8180
sctp-rto-initial
Configures the initial time for SCTP retransmission timeouts (RTOs).
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > SCTP Parameter Template Configuration
configure > sctp-param-template template_name
Entering the above command sequence results in the following prompt:
[local]host_name(sctp-param-template)#
Syntax
sctp-rto-initial value
default sctp-rto-initial
default
Returns the command to its default setting of 30 (3000 milliseconds).
value
Specifies the initial time for SCTP RTO as an integer from 1 through 1200. The granularity is in 100ms
increments (20 = 2000ms). Default: 30 (3000 milliseconds)
increments (20 = 2000ms). Default: 30 (3000 milliseconds)
Usage
Use this command to configure the initial time for SCTP RTOs.
Example
The following command configures the initial SCTP RTO to 6000ms:
sctp-rto-initial 60