Cisco Cisco Packet Data Interworking Function (PDIF)
Service Redundancy Protocol Configuration Mode Commands
configuration-interval ▀
Command Line Interface Reference, StarOS Release 16 ▄
8195
configuration-interval
Defines the configuration validation interval.
Product
All products supporting ICSR
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Service Redundancy Protocol Configuration
configure > context context_name > service-redundancy-protocol
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-srp)#
Syntax
configuration-interval interval
default configuration-interval
default
Resets the configuration interval to the default setting of 3600 seconds.
interval
Specifies the amount of time (number of seconds) between one configuration validation and the next
configuration validation.
configuration validation.
interval
must be an integer from 1 through 65535. Default = 3600.
Usage
This configures the interval between configuration validations of the primary and backup chassis.
Example
The following example sets the configuration interval to 34 seconds:
configuration-interval 34