Cisco Cisco Packet Data Interworking Function (PDIF)
SGSN Global Configuration Mode Commands
▀ tlli-cb-audit
▄ Command Line Interface Reference, StarOS Release 16
8274
tlli-cb-audit
This command enable (default is disabled) or disables a periodic (hourly) audit of TLLI-CBs in the BSSGP�
layer.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > SGSN Global Configuration
configure > sgsn-global
Entering the above command sequence results in the following prompt:
[local]host_name(config-sgsn-global)#
Syntax
tlli-cb-audit
[ default | no ] tlli-cb-audit
default
Include
default
with the command to disable the audit function.
no
Include
no
with the command to disable the audit function.
Usage
This command is used to clean-up hanging or unassociated TLLI in the BSSGP layer. This configuration
defined with this command will be common to all NSE configured for this SGSN.
Independent of this command configuration, the SGSN triggers and audit when the number of TLLI-CBs
reaches 35,000.
defined with this command will be common to all NSE configured for this SGSN.
Independent of this command configuration, the SGSN triggers and audit when the number of TLLI-CBs
reaches 35,000.
Example
Use the following command to enable the hourly audit for unassociated TLLl-CBs:
tlli-cb-audit