Cisco Cisco Packet Data Interworking Function (PDIF)
SGSN Service Configuration Mode Commands
nri length ▀
Command Line Interface Reference, StarOS Release 16 ▄
8359
nri length
This command defines the Network Resource Identifier (NRI) of the SGSN that is stored in the P-TMSI (bits 23 to 18).
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > SGSN Service Configuration
configure > context context_name > sgsn-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-sgsn-service)#
Syntax
nri length nri_length [ nri-value nri_value | null-nri-value null_nri_value non-
broadcast mcc mcc mnc mnc lac lac_id rac rac_id nri-value value ]
broadcast mcc mcc mnc mnc lac lac_id rac rac_id nri-value value ]
default nri
no nri
default
Release 14.0 and higher.
Resets the nri configuration to
Resets the nri configuration to
nri length
6 and
nri-value
0.
no
Deprecated in Release 14.0
Releases prior to 14.0, this command removes the configured NRI value and location information in the P-
TMSI that would be retrieved by this SGSN.
Releases prior to 14.0, this command removes the configured NRI value and location information in the P-
TMSI that would be retrieved by this SGSN.
nri length nri_length
Specifies the number of bits to be used in the P-TMSI, bits 23 to 18. to define the network resource identifier
(NRI). The NRI length configuration also sets the maximum size of the pool. If not configured, the NRI
length will be of zero length.
(NRI). The NRI length configuration also sets the maximum size of the pool. If not configured, the NRI
length will be of zero length.
nri_length
: Must be an integer from 1 to 6 to identify the number of bits.
null-nri-value null_nri_value
This keyword is only available in releases 8.1 and higher.
Configures the null NRI value which must be unique across the pool areas. This keyword is used for the
offloading procedure for SGSN pooling (enabled with the
Configures the null NRI value which must be unique across the pool areas. This keyword is used for the
offloading procedure for SGSN pooling (enabled with the
sgsn offloading
command, see the Exec Mode
chapter).
null_nri_value
is an integer 0 (zero) to 63 which identifies the SGSN to be used for the offloading
procedure for SGSN pooling. There is no default value for this parameter.