Cisco Cisco Packet Data Interworking Function (PDIF)
SSH Configuration Mode Commands
▀ subsystem
▄ Command Line Interface Reference, StarOS Release 16
8470
subsystem
Configures the system to perform file transfers using Secure FTP (SFTP) over ssh v2. Administrators must be
configured with the FTP attribute privilege to issue this command.
configured with the FTP attribute privilege to issue this command.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > SSH Configuration
configure > context context_name > server sshd
Entering the above command sequence results in the following prompt:
[local]host_name(config-sshd)#
Syntax
subsystem { cli | sftp }
no subsystem { cli | sftp }
no
Disables the SFTP ssh file transfer method or access to the CLI via ssh.
cli
Default: Enabled
Configures the SSH system for the current context to allow access to the CLI.
Configures the SSH system for the current context to allow access to the CLI.
sftp
Default: Disabled
Enables the SSH system for the current context to perform file transfers using Secure FTP (SFTP) over ssh
v2.
Enables the SSH system for the current context to perform file transfers using Secure FTP (SFTP) over ssh
v2.
Usage
Use this command to enable or disable file transfers using SFTP over an ssh v2 tunnel.
Also use this command to enable or disable access to the CLI over an SSH connection.
Also use this command to enable or disable access to the CLI over an SSH connection.
Example
The following command enables SFTP for the current context:
subsystem sftp
The following command disables access to the CLI through an SSH session for the current context:
no subsystem cli