Cisco Cisco Packet Data Interworking Function (PDIF)
Subscriber Configuration Mode Commands
▀ ims-auth-service
▄ Command Line Interface Reference, StarOS Release 16
8528
ims-auth-service
Enables IP Multimedia Subsystem (IMS) authorization support for subscriber. The specified IMSA service will be used
for performing IMS authorization and flow-based charging procedures.
for performing IMS authorization and flow-based charging procedures.
Product
PDSN
GGSN
P-GW
SAEGW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Subscriber Configuration
configure > context context_name > subscriber { default | name subscriber_name }
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-subscriber)#
Syntax
[ default | no ] ims-auth-service auth_svc_name
default
Configures default setting.
Default: Disabled or as specified at the context or network access service level or in subscriber template.
Default: Disabled or as specified at the context or network access service level or in subscriber template.
no
Removes the specified IMS authorization service from the subscriber configuration.
ims-auth-service
auth_svc_name
Specifies name of the IMS authorization service.
auth_svc_name
must be an alphanumeric string of 1 through 63 characters preconfigured within the same
context of this subscriber.
Usage
This feature provides the IMS authorization service configuration for Gx interface in IMS service node.
Example
Following command applies a previously configured IMS authorization service named
ims_interface1
to
a subscriber within the specific context.
ims-auth-service ims_interface1