Cisco Cisco Packet Data Interworking Function (PDIF)
Subscriber Configuration Mode Commands
send-destination-pgw ▀
Command Line Interface Reference, StarOS Release 16 ▄
8629
send-destination-pgw
Configures how the HSGW selects a P-GW address for the “Destination-PGW” AVP.
Product
HSGW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Subscriber Configuration
configure > context context_name > subscriber { default | name subscriber_name }
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-subscriber)#
Syntax
send-destination-pgw { all | explicit-only | implicit-only }
no send-destination-pgw
no
Removes the configuration for this command.
all
P-GW address is obtained either by explicit or implicit mechanism.
explicit-only
The UE performs LCP/PPP procedures, and attaches with a specific APN. The HSGW queries the AAA over
the STa interface and receives a MIP6-Agent-Info AVP that includes a sub AVP of Destination-Host. The
HSGW copies the value of the Destination-Host AVP in the Destination-PGW AVP which is sent in the
CCR-I to the PCRF.
the STa interface and receives a MIP6-Agent-Info AVP that includes a sub AVP of Destination-Host. The
HSGW copies the value of the Destination-Host AVP in the Destination-PGW AVP which is sent in the
CCR-I to the PCRF.
implicit-only
The UE performs LCP/PPP procedures, and attaches with a specific APN. The AAA does not return the P-
GW to use, so the HSGW performs NAPTR procedures to determine the P-GW which will be used.
GW to use, so the HSGW performs NAPTR procedures to determine the P-GW which will be used.
Usage
Use this command to configure how the HSGW selects a P-GW address for the “Destination-PGW” AVP.
This AVP is sent over Gxa to the PCRF.
This AVP is sent over Gxa to the PCRF.
Example
Configures the HSGW to select either implicit or explicit selection method.
send-destination-pgw all