Cisco Cisco Packet Data Interworking Function (PDIF)
Subscriber Configuration Mode Commands
▀ timeout idle
▄ Command Line Interface Reference, StarOS Release 16
8632
timeout idle
Configures the idle timeout duration for the long duration timer associated with a subscriber session.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Subscriber Configuration
configure > context context_name > subscriber { default | name subscriber_name }
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-subscriber)#
Syntax
timeout idle idle_dur
{ default | no } timeout idle
default | no
Indicates the timeout specified is to be returned to its default behavior. If no specific timeout is specified, then
all are set to their default behavior.
all are set to their default behavior.
timeout idle
Default: 0
Specifies the maximum duration of the session (in seconds) can remain idle before the system automatically
terminates the session due to inactivity.
Specifies the maximum duration of the session (in seconds) can remain idle before the system automatically
terminates the session due to inactivity.
idle_dur
Specifies the maximum amount of time (in seconds) before the specified timeout action is activated.
idle_dur
must be an integer from 0 through 2147483647. The special value 0 disables the timeout
specified.