Cisco Cisco Packet Data Interworking Function (PDIF)
VLAN Configuration Mode Commands
▀ priority
▄ Command Line Interface Reference, StarOS Release 16
8748
priority
Sets the 802.1p VLAN priority bit.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Port Configuration > VLAN Configuration
configure > port ethernet slot_number/port_number > vlan vlan_tag_id
Entering the above command sequence results in the following prompt:
[local]host_name(config-port-slot_number/port_number-vlan-vlan-id)#
Syntax
priority value
no priority
no
Disables the setting of the 802.1p priority bit.
value
Sets the value of the 802.1p priority bit as an integer from 0 through 7, with 7 being the highest priority.
Usage
Set a value for the VLAN priority bit.
Example
To set a VLAN priority bit value, use the following command:
priority 3
To disable the use of a VLAN priority bit, use the following command:
no priority