Cisco Cisco Packet Data Interworking Function (PDIF)
S-GW CDR Field Descriptions
CDR Fields ▀
GTPP Interface Administration and Reference, StarOS Release 18 ▄
403
Duration
This field contains the duration in seconds for the record. For partial records, only the interval described by the
“recordOpeningTime” and the “last ChangeTime” in the “ListOfTrafficVolumes” is counted. The value is reset for each new
partial CDR. This value is converted from the internal representation in milliseconds to an integer value representing only
seconds. The mechanism for this conversion (ceiling, floor, round-off) can be configured.
“recordOpeningTime” and the “last ChangeTime” in the “ListOfTrafficVolumes” is counted. The value is reset for each new
partial CDR. This value is converted from the internal representation in milliseconds to an integer value representing only
seconds. The mechanism for this conversion (ceiling, floor, round-off) can be configured.
Format
Integer
Length
1-5 bytes
Dynamic Address Flag
This field indicates that PDN address has been dynamically allocated for that particular IP CAN bearer (PDN connection).
This field is missing if address is static. Dynamic address allocation might be relevant for charging e.g. as one resource
offered and possibly owned by network operator. The presence of this field indicates that the Served PDP Address was
dynamically assigned during context activation.
This field is missing if address is static. Dynamic address allocation might be relevant for charging e.g. as one resource
offered and possibly owned by network operator. The presence of this field indicates that the Served PDP Address was
dynamically assigned during context activation.
Format
Boolean
Length
1 byte
List of Traffic Data Volumes
This list includes one or more Traffic Volume containers related to a “Change of Charging Condition”. The maximum number
of containers is configurable.
of containers is configurable.
Format
Sequence
Length
Variable
Change Of Charging Condition
Each traffic volume container contains details related to a charging condition as described in the following
subsections. A new container is usually created for a QoS change and for tariff changes.
subsections. A new container is usually created for a QoS change and for tariff changes.
Format
Sequence
Length
Variable