Cisco Cisco Packet Data Interworking Function (PDIF)
HNB-GW Service Configuration Procedures
▀ DHCP Configuration
▄ HNB-GW Administration Guide, StarOS Release 17
112
DHCP Configuration
To configure DHCP Proxy interface support on chassis for HNB-GW service:
Step 1
Create a DHCP service specific to HNB-GW service by applying the example configuration in the Configuring DHCP
Service section.
Service section.
Step 2
Create a subscriber template for HNB clients sesssion and associate the DHCP service with created subscriber template
by applying the example configuration in the Configuring Subscriber Template for HNB section.
by applying the example configuration in the Configuring Subscriber Template for HNB section.
Step 3
Save your configuration to flash memory, an external memory device, and/or a network location using the Exec mode
command
command
save configuration
. For additional information on how to verify and save configuration files, refer to the
System Administration Guide and the Command Line Interface Reference.
Configuring DHCP Service
Configure a DHCP service for DHCP interface support in the HNB-GW service by applying the following example
configuration:
configuration:
configure
context <vpn_ctxt_name>
dhcp-service <dhcp_svc_name> -noconfirm
dhcp client-identifier ike-id
dhcp server selection-algorithm use-all
dhcp server <dhcp_server_ip>
dhcp server port 61610
end
Notes:
<
vpn_ctxt_name
> is name of the source context in which HNB-GW service is configured.
<
dhcp_svc_name
> is name of the DHCP service configured in Context Configuration mode for DHCP
interface support in HNB-GW service.
<
dhcp_server_ip
> IP address of the DHCP server associated with DHCP service for DHCP interface support
in HNB-GW service.
For more commands and keyword options, refer Command Line Interface Reference.
Configuring Subscriber Template for HNB
Configure the subscriber template to associate the DHCP service for HNB clients by applying the following example
configuration:
configuration: