Cisco Cisco Packet Data Gateway (PDG)
Command Changes
egtp
The new keyword gngp-modify-bearer-rsp-with-apn-ambr enables sending MBRsp with APN-AMBR
during GnGp HO to sync with old behavior. By default, this CLI is disabled.
during GnGp HO to sync with old behavior. By default, this CLI is disabled.
configure
context context_name
pgw-service <pgw-service-name>
[ default | no ] egtp gngp-modify-bearer-rsp-with-apn-ambr
end
end
Notes:
• gngp-modify-bearer-rsp-with-apn-ambr: Sends Modify Bearer Response with APN-AMBR only for
GnGp Handoff.
• default: Disables the new keyword. MBRsp should not have APN-AMBR, but UBReq should be
triggered to send updated APN-AMBR.
• no: Disables this functionality. MBRsp should not have APN-AMBR, but UBReq should be triggered
to send updated APN-AMBR.
Performance Indicator Changes
show pgw-service all
The following field has been added in the output of this command.
• EGTP GnGp Modify bearer res with APN-AMBR: Enabled /Disabled
RTT Support Expanded to Include PMIPv6 (S2a)
CSCut82602 - RTT support to be expanded to include PMIPv6 (S2a)
Related CDETS ID = CSCut82619
Feature Changes
Previous Behavior: For eHRPD, RTT messages were not generated even if configuration was enabled.
New Behavior: For eHRPD, RTT messages are generated if configuration is enabled.
Performance Indicator Changes
System Schema
The following counters have been added for RTT messages:
Release Change Reference, StarOS Release 19
306
P-GW Changes in Release 19
RTT Support Expanded to Include PMIPv6 (S2a)