Cisco Cisco Packet Data Gateway (PDG)
Similarly the source port of an uplink packet must be considered as the client port. For a downlink packet,
the source port must be considered as the server port and the destination port as the client port. The new CLI
commands added to support client/server port configurations are configured in the ACS Ruledef Configuration
mode and Firewall-and-NAT Access Ruledef Configuration mode.
the source port must be considered as the server port and the destination port as the client port. The new CLI
commands added to support client/server port configurations are configured in the ACS Ruledef Configuration
mode and Firewall-and-NAT Access Ruledef Configuration mode.
Command Changes
tcp client-port
This new command configures an access ruledef to analyze user traffic based on client TCP port.
configure
active-charging service service_name
access-ruledef access_ruledef_name
[ no ] tcp client-port { operator port_number | { !range | range } { start_range to end_range |
port-map port_map_name } }
end
tcp client-port
This command allows you to define rule expressions to match client port number in TCP headers.
configure
active-charging service service_name
ruledef ruledef_name
[ no ] tcp client-port { operator port_number | { !range | range } { start_range to end_range |
port-map port_map_name } }
end
tcp server-port
This command configures an access ruledef to analyze user traffic based on server TCP port.
configure
active-charging service service_name
access-ruledef access_ruledef_name
[ no ] tcp server-port { operator port_number | { !range | range } { start_range to end_range |
port-map port_map_name } }
end
tcp server-port
This command allows you to define rule expressions to match server port number in TCP headers.
configure
active-charging service service_name
ruledef ruledef_name
[ no ] tcp server-port { operator port_number | { !range | range } { start_range to end_range |
port-map port_map_name } }
end
Release Change Reference, StarOS Release 19
310
PSF Changes in Release 19
Support for Client and Server Port in Access Ruledefs