Cisco Cisco Packet Data Gateway (PDG)
prefer-as-cap [ both-subscription-and-local | subscription | local ]
end
end
override-arp-with-ggsn-arp
The existing command [remove] override-arp-with-ggsn-arp under the Call Control Profile is used to enable
or disable the ability of the SGSN to override an Allocation/Retention Priority (ARP) value with one received
from a GGSN. If there is no authorized Evolved ARP received from the GGSN, by default the SGSN continues
to use the legacy ARP included in the Quality of Service (QoS) Profile IE.
or disable the ability of the SGSN to override an Allocation/Retention Priority (ARP) value with one received
from a GGSN. If there is no authorized Evolved ARP received from the GGSN, by default the SGSN continues
to use the legacy ARP included in the Quality of Service (QoS) Profile IE.
configure
call-control-profile profile_name
[remove] override-arp-with-ggsn-arp
end
end
Performance Indicator Changes
show quality-of-service-profile full all
The following parameter is displayed if gprs-subscription is selected in the epc-qos-params-in-gtpv1
command:
command:
• Sending of epc-qos-params to GGSN
show subscriber sgsn-only full all
The following new parameters are added to the show subscriber sgsn-only full all command:
• Evolved Allocation/Retention Priority
• Priority level
• Pre-emption Vulnerability
• Pre-emption Capability
• AMBR
• Negotiated APN-AMBR UL
• Negotiated APN-AMBR DL
• Max-Requested-Bandwidth-UL
• Max-Requested-Bandwidth-DL
• Applied UE-AMBR DL
IMSI Range Support Expanded
CSCuu50781 - IMSI-Range analysis limit reached in Cisco SGSN
Release Change Reference, StarOS Release 19
410
SGSN Changes in Release 19
IMSI Range Support Expanded