Cisco Cisco Packet Data Gateway (PDG)
MME Changes in Release 17
▀ MME Enhancements for 17.0
▄ Release Change Reference, StarOS Release 17
300
Rejected
Dropped
show lte-policy congestion-action-profile name
The output of this command now displays the configuration of LAPI and APN-based congestion options. For example,
the following output shows a congestion control profile which is configured to drop UE initiated bearer resource
requests. The MME will drop only those subscribers which are subscribed to specific APNs (as defined in Operator
Policy) and which are LAPI:
the following output shows a congestion control profile which is configured to drop UE initiated bearer resource
requests. The MME will drop only those subscribers which are subscribed to specific APNs (as defined in Operator
Policy) and which are LAPI:
Congestion Action Profile 1
none handovers
none combined-attaches
none ps-attaches
none addn-pdn-connects
drop addn-brr-requests
lapi apn-based
...
show mme-service session full
The following highlighted fields have been added to display LAPI information for each session. LAPI indication can be
received in any of attach/extended service/TAU/bearer resource allocation/bearer resource modification/PDN
connectivity requests. If the indication is received in any of the above messages, it is displayed at the UE information
level. If the indication is received in a PDN CONNECTIVITY REQUEST message, it is displayed at the PDN
information level as well.
received in any of attach/extended service/TAU/bearer resource allocation/bearer resource modification/PDN
connectivity requests. If the indication is received in any of the above messages, it is displayed at the UE information
level. If the indication is received in a PDN CONNECTIVITY REQUEST message, it is displayed at the PDN
information level as well.
Low Access Priority Indication: Yes/No
Initial UE establishment cause: Delay Tolerant Access / High Priority Access / Emergency / MT-Access /
Unknown
PDN Information
Low Access Priority Indication: Yes/No
show subscribers summary mme-service <name>
The following field has been added to this command to display the current number of LAPI devices.
LAPI Devices
show subscribers mme-only
The following field has been added to this command to display the current number of LAPI devices.
LAPI Devices
show mme-service session
The following field has been added to this command to display the current number of LAPI sessions.