Cisco Cisco Packet Data Interworking Function (PDIF)
ECS Changes in Release 17
ECS Enhancements for 17.1 ▀
Release Change Reference, StarOS Release 17 ▄
133
show active-charging rulebase statistics name
This command has been modified to include the following in the output:
TCP 2msl port reuse : n
CSCup08420, CSCup49998, CSCur67850 - PGW (Gp) rejecting dynamic rule
with Unknown Bearer ID cause
Applicable Products: GGSN, P-GW
Feature Changes
Handling of Rule Modification in UE Only Mode for EPS IP-CAN Bearer
Previous Behavior: Earlier rule binding was getting rejected.
New Behavior: Now, the binding of PCEF rules will be successful when BCM mode is set to UE-only for EPS IP-
CAN bearer without “bearer-ID” in the PCRF messages such as RAR or CCA-U.
CAN bearer without “bearer-ID” in the PCRF messages such as RAR or CCA-U.
Customer Impact: Rule binding in the 3G to 4G handover scenario will be successful in UE-only mode and any filter
(and related info) changes because of this modification/installation/removal will not be notified to UE as updates in UE
only mode cannot be sent to UE.
(and related info) changes because of this modification/installation/removal will not be notified to UE as updates in UE
only mode cannot be sent to UE.
These rules are only considered for charging and the expectation is that the same rules are again modified in 4G (if
handover is done) so that the filters (and related info) can be notified to UE.
handover is done) so that the filters (and related info) can be notified to UE.
CSCup30908 - Incl X-header for IPv4 Unique Identity with “128bit-string” IPv6
address
Applicable Products: P-GW
Feature Changes
Support for Insertion of New X-Header
Support has been added to insert attribute sent in the RADIUS access-accept message for Header Enrichment (HE). This
RADIUS attribute received in access-accept message should be in 128 bit string format and ECS will insert it in the X-
header, as is, in string format. This 128 bit string can be either IPv4 or IPv6 address assigned to the subscriber.
RADIUS attribute received in access-accept message should be in 128 bit string format and ECS will insert it in the X-
header, as is, in string format. This 128 bit string can be either IPv4 or IPv6 address assigned to the subscriber.
Command Changes
x-header format
A new keyword
radius-string
has been added to the command
insert
<xheader_field_name>
variable
bearer
radius-string
.
configure