Cisco Cisco Packet Data Interworking Function (PDIF)
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
SGSN Changes in Release 17
SGSN Enhancements for 17.0 ▀
Release Change Reference, StarOS Release 17 ▄
507
Command Changes
nri
The
nri
command in the GPRS service is updated to include a new keyword
non-pooled-nri-value
to enable
configuration of values of NRIs to be used for non-pooled area.
configure
context context_name
gprs-service service_name
nri length nri_length { nri-value nri_value | null-nri-value null_nri_value
non-broadcast-lac lac_id rac rac_id [ nri-value value ][ non-pooled-nri-value value ] }
non-broadcast-lac lac_id rac rac_id [ nri-value value ][ non-pooled-nri-value value ] }
end
Notes:
The same NRI can be configured using both the keywords
nri-value
and
non-pooled-nri-value
, this
implies the NRI can be used either in pooled area or non-pooled area. If an NRI is configured for both pooled
and non-pooled areas, then the SGSN re-uses the same NRI when moving from pooled to non-pooled areas and
vice versa.
and non-pooled areas, then the SGSN re-uses the same NRI when moving from pooled to non-pooled areas and
vice versa.
The NRIs configured using the
nri-value
keyword will be used only in pooled area if the keyword
non-
pooled-nri-value
is configured, else the NRIs configured using the
nri-value
keyword will be used for
both pooled and non-pooled areas.
nri length
The
nri length
command in the SGSN service is updated to include a new keyword
non-pooled-nri-value
to
enable configuration of values of NRIs to be used for non-pooled area.
configure
context context_name
sgsn-service service_name
nri length nri_length [ nri-value nri_value | null-nri-value null_nri_value non-
broadcast mcc mcc mnc mnc lac lac_id rac rac_id nri-value value non-pooled-nri-value
value ]
broadcast mcc mcc mnc mnc lac lac_id rac rac_id nri-value value non-pooled-nri-value
value ]
end
Notes:
The same NRI can be configured using both the keywords
nri-value
and
non-pooled-nri-value
, this
implies the NRI can be used either in pooled area or non-pooled area. If an NRI is configured for both pooled
and non-pooled areas, then the SGSN re-uses the same NRI when moving from pooled to non-pooled areas and
vice versa.
and non-pooled areas, then the SGSN re-uses the same NRI when moving from pooled to non-pooled areas and
vice versa.