Cisco Cisco Packet Data Interworking Function (PDIF)
MME Changes in Release 16
▀ MME Enhancements for 16.1
▄ Release Change Reference, StarOS Release 16
234
end
Notes:
retries
must be an integer from 1 to 5. The default setting is 0.
lcs-qos
This new command defines the location service QoS settings to be used for this emergency profile.
configure
lte-policy
lte-emergency-profile profile_name
lcs-qos horizontal-accuracy variable [ vertical-accuracy variable ]
no lcs-qos
end
Notes:
Horizontal and vertical positioning accuracy values must be entered as an integer from 0 to 127, where 0 is the
most accurate.
Configuration of these settings is optional. For Emergency Services, the MME will always set the Response
Time to Low Delay. If QoS is configured, the horizontal accuracy is mandatory. If a vertical accuracy is
specified in this command, the MME will set the Vertical Requested flag.
specified in this command, the MME will set the Vertical Requested flag.
associate sls-service
This new command associates an SLs service with a Location service. The SLS service provides an interface to the E-
SMLC in the context of a Location service.
SMLC in the context of a Location service.
configure
context context_name
location-service location_svc_name
associate sls-service sls_svc_name
[ no ] associate sls-service
end
Notes:
The SLs service is not a critical parameter for Location services, and the removal of the association does not
impact the status of the Location service. Any Location service procedures that were using an E-SMLC will get
aborted on the removal of an association of SLs service from a Location service. Note that on removal of SLs
service association, the MME will send a RESET message. No individual aborts will be sent to different E-
SMLCs configured.
aborted on the removal of an association of SLs service from a Location service. Note that on removal of SLs
service association, the MME will send a RESET message. No individual aborts will be sent to different E-
SMLCs configured.
sls schema