Cisco Cisco Packet Data Interworking Function (PDIF)

Descargar
Página de 642
MME Changes in Release 16   
▀  MME Enhancements for 16.0 
 
 
▄  Release Change Reference, StarOS Release 16 
276 
   
SGs Service Configured VLR Failure : Yes   Detached Count : 10   Total : 800 
CSCub06763 - Paging Load Control 
Feature Changes 
MME Message Rate Control
 
This feature requires that a valid MME Resiliency license key be installed. Contact your Cisco Account or Support 
representative for information on how to obtain a license. 
Customer Impact:  This feature provides controls to mitigate the undesirable effects of congestion due to excessive S1 
Paging load or upon failure of an EGTPC path. 
S1 Paging Rate Limit
 
In this release, the MME includes support for a new configuration to limit the rate of S1 paging requests sent per 
eNodeB per second. S1 Paging requests exceeding the configured rate threshold are dropped. All S1 Paging requests are 
treated uniformly without any special considerations for the type of paging request (CS/PS). 
Pacing UE Deactivation
 
During an EGTPC (S11/S10/S3) path failure, the MME detects the failure and begins the process of deactivating all UE 
sessions affected. The MME now supports two separate configurable internal pacing queues for deactivating UEs: one 
for active UEs and a second for idle mode UEs. This enables the path failure processing and deactivation pacing rate to 
be different for each of these queues.  
Upon detecting an EGTPC path failure, the impacted EGTPC tunnels are added to separate queues based on ECM-State 
and deactivations are scheduled based on the respective configured rates. 
Command Changes 
network-overload-protection mme-tx-msg-rate-control
 
This command enables and configures the S1 Paging Rate Limit feature as well as UE Deactivation Rates upon EGTPC 
path failure feature. 
configure 
   network-overload-protection mme-tx-msg-rate-control { egtp-pathfail ecm-idle rate ecm-
connected 
rate | enb s1-paging rate } 
   [ default ] network-overload-protection mme-tx-msg-rate-control  
   end 
Notes: 
 
The 
enb s1-paging
 keyword configures an S1 paging rate limit applicable to all eNodeBs connected to all 
MME services. S1 Paging requests to an eNodeB will be rate limited at this threshold value. S1 Paging 
requests to an eNodeB exceeding this threshold will be dropped.