Cisco Cisco Packet Data Interworking Function (PDIF)
P-GW Changes in Release 16
P-GW Enhancements for 16.0 ▀
Release Change Reference, StarOS Release 16 ▄
347
timeout bearer-inactivity exclude-default-bearer
no timeout bearer-inactivity [ exclude-default-bearer | gbr | non-gbr ]
end
Notes:
timeout
: Specifies that a bearer time out value will be configured for this APN.
bearer-inactivity
: Specifies that the system will check for low activity for a bearer.
gbr
: Specifies that the P-GW will check for low activity on a GBR bearer.
non-gbr
: Specifies that the P-GW will check for low activity on a non-GBR bearer.
dur_seconds
: Specifies the timeout for the bearer inactivity timer in seconds. Valid entries are from 300 to
2592000 seconds (5 minutes to 720 hours).
volume-threshold
: Specifies that a threshold value of the data traffic for a bearer will be used for the
inactivity timeout value.
downlink
: Threshold value of the downlink data traffic in a bearer.
total
: Specifies that the total of both uplink and downlink data will be used as a volume threshold.
uplink
: Threshold value of the uplink data traffic in a bearer.
bytes
must be a value from 1 to 4294967295.
exclude-default-bearer
: Ignore bearer inactivity handling for default/primary bearer.
Performance Indicator Changes
show apn name
This command has been enhanced to list bearer inactivity timeout settings, if configured.
bearer inactivity timeout (GBR Bearers)
bearer inactivity timeout (Non-GBR Bearers)
bearer inactivity exclude-default-bearer
show pgw-service-statistics all verbose
This command has been enhanced to list bearer inactivity timeout settings, if configured.
Inactivity timeout:
QCI 1: :
seconds
QCI 2: :
seconds
QCI 3: :
seconds
QCI 4: :
seconds
QCI 5: :
seconds
QCI 6: :
seconds