Cisco Cisco Packet Data Interworking Function (PDIF)
SecGW Changes in Release 16
SecGW Enhancements for 16.0 ▀
Release Change Reference, StarOS Release 16 ▄
457
Notes:
ip_address,
virtual_ip_address
and next_address can be specified in IPv4 dotted-decimal or IPv6 colon-
separated-hexadecimal format.
The next hop IP address is not required for point-to-point and tunnel interfaces.
interface_name specifies the egress interface.
rri-mode
This new ConnectedApps Configuration mode command configures the supported RRI mode.
configure
connectedapps
rri-mode { both | none | ras | s2s }
end
Notes:
ras = Remote Access Service
s2s = site-to-site
CSCui71288 – Bulk Stats support for 16.0 on SecGW
Performance Indicator Changes
wsg Schema
The following bulk statistics have been added in support of the Security Gateway (SecGW):
wsg-current-sessions-total
wsg-current-active-sessions
wsg-current-dormant-sessions
wsg-current-active-ipv4-sessions
wsg-current-dormant-ipv4-sessions
wsg-current-active-ipv6-sessions
wsg-current-dormant-ipv6-sessions
wsg-current-simple-ipv4-total
wsg-current-simple-ipv6-total
wsg-current-data-clients-total
wsg-total-simple-ip-attempts
wsg-total-simple-ip-successes