Cisco Cisco Packet Data Interworking Function (PDIF)
S-GW Changes in Release 16
▀ S-GW Enhancements for 16.0
▄ Release Change Reference, StarOS Release 16
562
dur_seconds
: Specifies the timeout for the
gbr
or
non-bgr
bearer inactivity timer in seconds. Valid entries
are from 900 to 2592000 seconds (15 minutes to 720 hours).
volume-threshold
: Specifies that a threshold value of the data traffic for a bearer will be used for the
inactivity timeout value.
total
: Specifies that the total of both uplink and downlink data will be used as a volume threshold.
bytes
must
be a value from 1 to 4294967295.
uplink
: Specifies that an uplink data volume threshold will be used.
bytes
must be a value from 1 to
4294967295.
downlink
: Specifies that a downlink data volume threshold will be used.
bytes
must be a value from 1 to
4294967295.
exclude-default-bearer
: Specifies that inactivity handling for the default bearer will be excluded.
Performance Indicator Changes
show apn-profile full name
This command has been enhanced to list bearer inactivity timeout settings, if configured.
Bearer inactivity timeout:
Exclude default bearer :Yes/No
GBR:
Timeout (Seconds) :
seconds
Threshold (Bytes) :
bytes
Direction :Downlink/Uplink/Bi-directional
non-GBR:
Timeout (Seconds) :
seconds
Threshold (Bytes) :
bytes
Direction :Downlink/Uplink/Bi-directional
show sgw-service-statistics all verbose
This command has been enhanced to list bearer inactivity timeout settings, if configured.
Inactivity timeout:
QCI 1: :
seconds
QCI 2: :
seconds
QCI 3: :
seconds
QCI 4: :
seconds
QCI 5: :
seconds
QCI 6: :
seconds
QCI 7: :
seconds