Cisco Cisco Nexus 1100 Cloud Services Platform Notas de publicación
4
Cisco Nexus Cloud Services Platform Release Notes, Release 5.2(1)SP1(7.3b)
Upgrading to the Cisco Nexus Cloud Services Platform Release 5.2(1)SP1(7.3b)
Supervisor state: HA standby
Internal state: HA standby
Step 5
After the HA synchronization is complete, switch over to the other module:
switch# system switchover
switch#
Broadcast message from root (console) (Thu Oct 2 09:28:33 2014):
The system is going down for reboot NOW!
Step 6
On the new active supervisor module, wait for the other supervisor module to come back online:
2014 Oct 2 09:28:33 switch %SYSMGR-2-HASWITCHOVER_PRE_START: This supervisor is becoming
active (pre-start phase).
2014 Oct 2 09:28:33 switch %SYSMGR-2-HASWITCHOVER_START: Supervisor 2 is becoming active.
2014 Oct 2 09:28:33 switch Oct 2 09:28:33 %KERN-1-SYSTEM_MSG: Failed to send MTS message.
error:-1 - kernel
2014 Oct 2 09:28:34 switch %SYSMGR-2-SWITCHOVER_OVER: Switchover completed.
2014 Oct 2 09:28:58 switch %PLATFORM-2-MOD_REMOVE: Module 1 removed (Serial number )
switch# 2014 Oct 2 09:36:09 switch %PLATFORM-2-MOD_DETECT: Module 1 detected (Serial
number :unavailable) Module-Type Cisco Virtual Services Appliance Model :unavailable
Step 7
Verify that the module is online. When HA is complete, verify that the upgrade procedure is complete:
switch# show system redundancy status
Redundancy role
---------------
administrative: secondary
operational: secondary
Redundancy mode
---------------
administrative: HA
operational: HA
This supervisor (sup-2)
-----------------------
Redundancy state: Active
Supervisor state: Active
Internal state: Active with HA standby
Other supervisor (sup-1)
------------------------
Redundancy state: Standby
Supervisor state: HA standby
Internal state: HA standby