Cisco Cisco Packet Data Gateway (PDG)
Configuring the SaMOG Gateway
▀ Configuring the System to Perform as a SaMOG Gateway
▄ SaMOG Administration Guide, StarOS Release 19
110
Step 9
Create and configure the AAA group for Diameter and AAA authentication and accounting by applying the example
configuration in the
configuration in the
Step 10 Configure the GTPP group consisting of the GTPP dictionary and CDR attributes, to be used for SGW and SGSN
CDRs, and associate the GTPP group to the SaMOG Call Control Profile by applying the example configuration in the
Step 11 Configure the DNS service by applying the example configuration in the
section.
Step 13 Optional. Enable web-based authorization by applying the example configuration in the
Step 14 Configure and bind interfaces to the relevant interfaces by applying the example configuration in the
Step 15 Optional. Enable event logging by applying the example configuration in the
Step 16 Optional. Enable the sending of CGW and SaMOG SNMP traps by applying the example configuration in the
Step 17 Optional. Configure the system to gather and transfer bulk statistics by applying the example configuration in the
Step 18 Save the completed configuration by following the instructions in the
Creating the SaMOG Gateway Context
Create the context in which the SaMOG service will reside. The MRME, CGW, SaMOG and other related services will
be configured in this context. Create the SaMOG context by applying the configuration example below.
be configured in this context. Create the SaMOG context by applying the configuration example below.
config
context samog_context_name
end
Configuring the MRME, CGW and SaMOG Services
The MRME and CGW services provide the SaMOG functionality. They must be configured in the SaMOG context and
then associated with a SaMOG service name. Configure the MRME, CGW, and SaMOG services by applying the
example configuration below.
then associated with a SaMOG service name. Configure the MRME, CGW, and SaMOG services by applying the
example configuration below.
context context_name
twan-profile twan_profile_name
radius client { ipv4/ipv6_address [/mask ] } [ encrypted ] key value [
disconnect-message [ dest-port destination_port_number ] ] [ dictionary { custom70 |
custom71 } ]
disconnect-message [ dest-port destination_port_number ] ] [ dictionary { custom70 |
custom71 } ]