Cisco Cisco Packet Data Interworking Function (PDIF)
SaMOG Gateway Offline Charging
▀ Configuring the SaMOG CDRs
▄ SaMOG Administration Guide, StarOS Release 16
66
Configuring the SaMOG CDRs
The following table lists the configuration commands related to creating and formatting the CDRs. These commands
appear at different portions of the system configuration file.
appear at different portions of the system configuration file.
gttp group <name>
- These are commands specified within the billing context.
Table 17. CDR Configuration Parameters
Command
Default
Comment
Trigger-related Configuration
gttp group<name>
in Billing Context
gtpp trigger volume-limit
Enabled
When this trigger is disabled, no partial record closure occurs when
the volume limit is reached.
the volume limit is reached.
gtpp trigger time-limit
Enabled
When this trigger is disabled, no partial record closure occurs when
the configured time limit is reached.
the configured time limit is reached.
gtpp trigger tariff-time-change
Enabled
When this trigger is disabled, container closure does not occur for a
tariff-time change.
tariff-time change.
gtpp trigger qos-change
Enabled
Disabling this trigger ignores a qos-change and does not open a new
CDR for it.
CDR for it.
CDR Attribute-related Configuration
gtpp attribute diagnostics
No
Includes the Diagnostic field in the CDR that is created when PDP
contexts are released.
contexts are released.
gtpp attribute duration-ms
No
Specifying this option results in mandatory "Duration" field in the
CDR to be recorded in milliseconds rather than seconds.
CDR to be recorded in milliseconds rather than seconds.
gtpp attribute local-record-
sequence-number
sequence-number
No
Specifying this option includes optional fields "Local Record
Sequence Number" and "Node-ID" in the CDR. Since the "Local
Record Sequence Number" has to be unique within one node
(identified by "Node-ID"), "Node-ID" field will consist of sessMgr
Recovery count + AAA Manager identifier + the name of the GSN
service.
Since each AAA Manager generate S-CDRs independently, the
"Local Record Sequence Number" and "Node ID" fields will
uniquely identify a CDR.
Sequence Number" and "Node-ID" in the CDR. Since the "Local
Record Sequence Number" has to be unique within one node
(identified by "Node-ID"), "Node-ID" field will consist of sessMgr
Recovery count + AAA Manager identifier + the name of the GSN
service.
Since each AAA Manager generate S-CDRs independently, the
"Local Record Sequence Number" and "Node ID" fields will
uniquely identify a CDR.
gtpp attribute msisdn
Enabled
Specifying this option includes field "MSISDN" in the CDR.
gtpp attribute node-id-suffix
<string>
<string>
No
String
between 1
and 16
characters
String
between 1
and 16
characters
Specifies the string suffix to use in the NodeID field of S- CDRs.
With the default setting of "no", the SaMOG Gateway uses the
GTPP context name for the Node ID field.
With the default setting of "no", the SaMOG Gateway uses the
GTPP context name for the Node ID field.
gtpp attribute record-type
{sgwrecord | sgsnpdprecord }
{sgwrecord | sgsnpdprecord }
No
If not explicitly configured, the record type selection is based on the
SaMOG license used.
SaMOG license used.
Policy Accounting in Source Context