Cisco Cisco Packet Data Gateway (PDG)
Reverse Route Injection
High Availability for RRI ▀
SecGW Administration Guide, StarOS Release 18 ▄
59
rri-mode Command
This ConnectedApps Configuration mode CLI command configures the supported RRI mode.
configure
connectedapps
rri-mode { both | none | ras | s2s }
end
Notes:
This command configures the anchor-route for an L3-L3 interchassis HA scenario.
both = enabled for RAS and S2S
none = disabled for all flow types
ras = Remote Access Service only
s2s = site-to-site only
Sample StarOS RRI HA Configurations
ConnectedApps (oneP) Configuration
config
context local
interface CA
ip address 192.168.122.10 255.255.255.0
exit
subscriber default
exit
aaa group default
exit
no gtpp trigger direct-tunnel
ip route 0.0.0.0 0.0.0.0 192.168.122.110 CA
exit
port ethernet 1/1
no shutdown