Cisco Cisco Packet Data Interworking Function (PDIF)
show hss-peer-service
▀ show hss-peer-service service name <name>
▄ Statistics and Counters Reference, StarOS Release 18
3998
show hss-peer-service service name <name>
Table 393.
show hss-peer-service service name <name>
Command Output Descriptions
Field
Description
Service name
The name of the HSS peer service configured and running on the system.
Context
The name of the VPN context in which HSS peer service configured and running on the system.
Status
Indicates whether the HSS peer service is started or not.
Diameter hss-endpoint
The Diameter endpoint name configured in the HSS peer service configuration mode for the S6a HSS
interface.
interface.
Diameter eir-endpoint
The Diameter endpoint name configured in the HSS peer service configuration mode for the S13 EIR
interface.
interface.
Diameter hss-dictionary
The name of Diameter dictionary configured for messaging which is to be used for HSS peer service
sessions.
sessions.
Update-Dictionary-AVPs The release of 3GPP 29.272 that is configured to be used for the HSS peer service, either 3gpp-r10,
3gpp-r9, or N/A if
diameter update-dictionary-avps
command is not configured.
Request timeout
The timeout duration in seconds set for heartbeat checking of Diameter requests with the HSS server.
Request Auth-vectors
The number of authentication vectors the MME requests in an Authentication-Information-Request
(AIR) message to the HSS for each UE requiring authentication.
(AIR) message to the HSS for each UE requiring authentication.
Zone Code format
Displays how the MME is to interpret the zone-code received from the HSS. This field displays the
setting, as configured using the
setting, as configured using the
zone-code-format
command in the HSS Peer Service configuration
mode. The possible values are “octet-string” (default) and “ascii-string”.
Notify-Req-Msg
Displays if the MME is configured to send Notify-Request-Messages to the HSS. Possible values are
Enable and Disable.
Enable and Disable.
Destination Realm
Displays the configuration of the
dynamic-destination-realm
HSS Peer Service command.
Possible values are “Configured Peer Realm” (default) or “Dynamic Realm”.
Failure-Handling
This group shows the configuration/settings of failure handling actions on various type of Diameter
messages for different type of failure.
messages for different type of failure.
Message Type
The type of Diameter messages configured for failure handling on specific type of failure or error.
The following types of Diameter messages can be configured for failure handling:
The following types of Diameter messages can be configured for failure handling:
Authentication-Information-Request
Check-Identity-Request
Notify-Request
Purge-UE-Request
Update-Location-Request