Cisco Cisco Packet Data Interworking Function (PDIF)
show port
▀ show port table
▄ Statistics and Counters Reference, StarOS Release 18
4344
show port table
Table 501.
show port table
Command Output Descriptions
Field
Description
Port
Specifies the chassis slot and port numbers (<slot>/<port>) for all installed line cards.
Role
The communication role played by this port.
Mgmt: Port has been designated for remote management access.
Srvc: Port handles subscriber traffic.
Type
The card type descriptor.
Admin
Indicates whether or not the card has been configured for use via software. If it has been configured, Enabled
will be displayed. If not, Disabled will be displayed.
will be displayed. If not, Disabled will be displayed.
Oper
The operational state of the card – Up or Down.
Link
The link status – Up or Down.
State
The operational mode of the card that the port belongs to. The card can be in one of the following modes:
Active: Indicates that the card is an active component that will be used to process subscriber data
sessions.
sessions.
Standby: Indicates that the card is a redundant component. Redundant components will become active
through manual configuration or automatically should a failure occur.
through manual configuration or automatically should a failure occur.
Offline: Indicates that the card is installed but is not ready to process subscriber data sessions. This
could be because it is not completely installed (for example. the card interlock switch is not locked).
Refer to the Installation Guide for additional information.
could be because it is not completely installed (for example. the card interlock switch is not locked).
Refer to the Installation Guide for additional information.
Pair
Interface slot/port number of LAG peer port.
LAG Port Status:
LAG Port Status:
LA+ = Port is actively used for distributing
LA- = Port failed to negotiate LACP
LA~(tilde) = Port negotiated LACP but another peer was selected
LA*(asterisk) = Port is (re)negotiating LACP
Redundant
Interface slot/port number of redundant LAG peer port.
Untagged:
Indicates the administrative, operational, link and active/standby states of an untagged (non-VLAN) port.
Tagged: VLAN
<vlan_id>
<vlan_id>
Indicates the administrative, operational, link and active/standby states of a VLAN port.