Cisco Cisco Packet Data Interworking Function (PDIF)
show radius
show radius servers ▀
Statistics and Counters Reference, StarOS Release 18 ▄
4385
show radius servers
Table 516. show radius { servers detail Command Output Descriptions
Field
Description
vvvvv
Displays information about the type and state of the RADIUS server.
From left-to-right, the first character represents the RADIUS server Type as one of the following:
From left-to-right, the first character represents the RADIUS server Type as one of the following:
(A) - Authentication
(a) - Accounting
(C) - Charging
(c) - Charging Accounting
(M) - Mediation
(m) - Mediation Accounting
From left-to-right, the second character represents the RADIUS server Preference as one of the
following:
following:
(P) - Primary
(S) - Secondary
From left-to-right, the third character represents the RADIUS server State as one of the following:
(A) - Active
(N) - Not Responding
(D) - Down
(W) - Waiting Accounting-On
(I) - Initializing
(w) - Waiting Accounting-Off
(a) Active Pending
(U) - Unknown
From left-to-right, the fourth character indicates the RADIUS server Administrative Status (which is
saved in the configuration file for re-establishment at reboot) as one of the following:
(E) - Enabled
(D) - Disabled
From left-to-right, the fifth character indicates whether the RADIUS server’s saved Administrative
Status may be overridden at the next reboot:
(O) - Overridden: (Note: to preserve the desired Administrative State, use the appropriate configuration
mode radius [accounting| charging|charging accounting] server command to reset the admin-status.)
(.) - Not Overridden
saved in the configuration file for re-establishment at reboot) as one of the following:
(E) - Enabled
(D) - Disabled
From left-to-right, the fifth character indicates whether the RADIUS server’s saved Administrative
Status may be overridden at the next reboot:
(O) - Overridden: (Note: to preserve the desired Administrative State, use the appropriate configuration
mode radius [accounting| charging|charging accounting] server command to reset the admin-status.)
(.) - Not Overridden
IP
Displays the IP address of the RADIUS server. The IP address is in IPv4 dotted-decimal notation.
Port
Displays the UDP port used to communicate with the RADIUS server.
Group
Display the RADIUS server group to which the server belongs.
Event History
Displays a historical record of state information for the server including a time/date stamp.