Cisco Cisco Packet Data Interworking Function (PDIF)
show sgs-service
▀ show sgs-service vlr-status full
▄ Statistics and Counters Reference, StarOS Release 18
4542
show sgs-service vlr-status full
Table 560.
show sgs-service vlr-status
Command Output Descriptions
Field
Description
MMEMGR
The MME manager instance where the SGs service is running.
MME Reset
A system-wide parameter which is set to "Yes" when the MME service ( and SGS service) is up or after
the MME restarts after a failure. This is a restoration indicator at MME service.
the MME restarts after a failure. This is a restoration indicator at MME service.
Service ID
The system generated identification number of the SGs service.
Peer ID
The system generated identification number of the VLR’s SCTP connection.
VLR Name
The VLR name as configured in the SGs service.
SGS Service Name
The configured SGs service name.
VLR Offload
Displays if the VLR is configured/marked for offload state.
SGS Service Address
The IP address of the interface to which the SGs service is bound.
SGS Service Port
The port number of the interface to which the SGs service is bound.
VLR IP Address (es)
The VLR IP address as configured in the SGs service. If multi-homing is configured, both addresses
will be shown. The path status for each is displayed as either UP or DOWN.
will be shown. The path status for each is displayed as either UP or DOWN.
VLR Port
The VLR port number as configured in the SGs service.
Assoc State
The current state of the SCTP association, either UP or DOWN.
Assoc Uptime
The total amount of time ( hours | minutes | seconds) the current SCTP association has been active (up).
The format of Assoc UpTime is 0000d00h00m (where d= day, h=hour, m=minutes) when h > =24 hrs,
otherwise it will be displayed as 00h00m00s.
The format of Assoc UpTime is 0000d00h00m (where d= day, h=hour, m=minutes) when h > =24 hrs,
otherwise it will be displayed as 00h00m00s.
Assoc State Up Count
The total number of times the SCTP association has come up.
VLR Failure Detach
Indicates if the
sgs vlr-failure
Exec Mode command is enabled (Yes) or disabled (No).
Detach Count: The total number of subscribers that have already been detached as a result of the sgs
vlr-failure command.
Total: Indicates the total number of subscribers that have to be detached.
Note: This field is not displayed when the
vlr-failure command.
Total: Indicates the total number of subscribers that have to be detached.
Note: This field is not displayed when the
vlr-recover
Config Mode command is enabled.
SGs Service
Configured VLR
Failure
Configured VLR
Failure
Indicates if the SGs service
vlr-recover
Config Mode command is enabled (Yes) or disabled (No).
Detach Count: The total number of subscribers that have already been detached as a result of the SGs
Service VLR Failure feature.
Total: Indicates the total number of subscribers that have to be detached.
Note: This field is only displayed when the SGs Service VLR Failure feature has been configured.
Service VLR Failure feature.
Total: Indicates the total number of subscribers that have to be detached.
Note: This field is only displayed when the SGs Service VLR Failure feature has been configured.
VLR Recover Detach
Indicates if the
sgs vlr-recover
Exec Mode command is enabled (Yes) or disabled (No).
Detach Count: The total number of subscribers that have already been detached as a result of the sgs
vlr-recover command.
Total: Indicates the total number of subscribers that have to be detached.
vlr-recover command.
Total: Indicates the total number of subscribers that have to be detached.