Cisco Cisco Packet Data Gateway (PDG) Prospecto
APN Configuration Mode Commands
▀ accounting-mode
▄ Cisco ASR 5x00 Command Line Interface Reference
1238
interim interval
. The
radius accounting interim interval
command sends INTERIM-
UPDATE messages at specific intervals.
Keywords to this command can be used in combination to each other, depending on configuration
requirements.
Keywords to this command can be used in combination to each other, depending on configuration
requirements.
Important:
If the accounting type in the APN is set to ‘none’ then G-CDRs will not be generated. If accounting
type is left as default “GTPP” and “billing-records” are configured in the ACS Rulebase Configuration Mode, then both
G-CDRs and eG-CDRs would be generated.
G-CDRs and eG-CDRs would be generated.
Example
The following command configures the APN to use the RADIUSr protocol for accounting:
accounting-mode radius
accounting-mode radius no-interims no-early-pdus
accounting-mode radius no-early-pdus no-interims