Cisco Cisco Packet Data Gateway (PDG) Prospecto
APN Configuration Mode Commands
▀ idle-timeout-activity
▄ Cisco ASR 5x00 Command Line Interface Reference
1298
idle-timeout-activity
Configures a session idle-timeout to be reset with uplink packets only, or with both uplink and downlink packets.
Product
GGSN
P-GW
SAEGW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > APN Configuration
configure > context context_name > apn apn_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-apn)#
Syntax
[ no ] idle-timeout-activity ignore-downlink
default idle-timeout-activity
default
Sets or restores the command to the default setting.
ignore-downlink
Sets the system to ignore the downlink traffic for consideration as activity for idle-timeout.
Usage
If
idle-timeout-activity ignore-downlink
is configured, the downlink (network to subscriber)
traffic will not be used to reset the idle-timeout. Only uplink (subscriber to network) packets will be able to
reset the idle-timeout.
By default,
reset the idle-timeout.
By default,
ignore-downlink
is negated by the
no
command so downlink traffic is also used to reset the
idle-timeout.
Example
The following command causes both uplink and downlink traffic to reset a session idle-timeout:
default idle-timeout-activity
The following command causes the session idle-timeout to be reset with only uplink packets:
idle-timeout-activity ignore-downlink