Cisco Cisco Packet Data Gateway (PDG) Prospecto
Call Control Profile Configuration Mode
▀ lcs-mt
▄ Cisco ASR 5x00 Command Line Interface Reference
1856
lcs-mt
This command enables/disables mobile-terminating Location Requests by access-type when Location Services
functionality is enabled.
functionality is enabled.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Call Control Profile Configuration
configure > call-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-call-control-profile-profile_name)#
Syntax
lcs-mt { allow | restrict } access-type { gprs | umts }
allow
Enables mobile-terminating Location Requests. This is the default state when Location Services are enabled.
Usage
This command ties Location Service functionality to a call-control profile by IMSI so that Location Services
can optionally be determined by an operator policy for incoming calls.
can optionally be determined by an operator policy for incoming calls.
Example
Use the following command to disable or disallow mobile-terminating Location Requests within a UMTS
network:
network:
lcs-mt restrict access-type umts