Cisco Cisco Packet Data Gateway (PDG) Prospecto
Context Configuration Mode Commands S-Z
session-event-module ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
2597
session-event-module
Enables the event module, enters the Session Event Module Configuration Mode where the sending of S-GW
subscriber-specific event files to an external server can be configured. From release 15.0 onwards, the session-event
module is used by SGSN for event logging. By default, EDR files are generated at the location: /hd-raid/records/edr.
After upgrading to release R15.0, if this CLI is configured, the path for EDR files changes to: /hd-raid/records/event.
subscriber-specific event files to an external server can be configured. From release 15.0 onwards, the session-event
module is used by SGSN for event logging. By default, EDR files are generated at the location: /hd-raid/records/edr.
After upgrading to release R15.0, if this CLI is configured, the path for EDR files changes to: /hd-raid/records/event.
Product
SAEGW
S-GW
SGSN
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration
configure > context context_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ctx)#
Syntax
[ no ] session-event-module
no
Disables the event module configuration.
Usage
Enter the Session Event Module Configuration Mode where the sending of S-GW subscriber-specific event
files to an external server can be configured.
Entering this command results in the following prompt:
files to an external server can be configured.
Entering this command results in the following prompt:
[context_name]hostname(config-event)#
Session Event Module Configuration Mode commands are defined in the Session Event Module
Configuration Mode Commands chapter.
Configuration Mode Commands chapter.