Cisco Cisco Packet Data Gateway (PDG) Prospecto
CSCF PCRF-Policy-Control Configuration Mode Commands
authorization policy-interworking-failure ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
2973
authorization policy-interworking-failure
Allows/rejects a session based on configuration in case of failure from PCRF.
Product
SCM (P-CSCF, A-BG)
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > Context Configuration > CSCF Service Configuration > Proxy-
CSCF Configuration > CSCF PCRF-Policy-Control Configuration
CSCF Configuration > CSCF PCRF-Policy-Control Configuration
configure > context context_name > cscf service service_name > proxy-cscf > pcrf-policy-
control
control
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-pcrf-policy-control)#
Syntax
authorization policy-interworking-failure { session-continue | session-reject [ response-
code code ] )
code code ] )
default authorization policy-interworking-failure
session-continue
P-CSCF continues session in case of failure from PCRF.
session-reject
P-CSCF rejects session in case of failure from PCRF.
response-code code
Specifies SIP response code for rejected session.
number
must be an integer from 400 to 699. Default is 500.
default
By default,
session-reject
is activated to reject session with default response code 500.
Usage
Use this command to configure for policy interworking failure. Allow or reject a session based on
configuration in case of failure from PCRF.
configuration in case of failure from PCRF.
Example
The following command rejects session in case of failure from PCRF with SIP response code
450
:
authorization policy-interworking-failure session-reject response-code
450
450