Cisco Cisco Packet Data Gateway (PDG) Prospecto
CSCF Proxy-CSCF Configuration Mode Commands
peer-sbc ▀
Cisco ASR 5x00 Command Line Interface Reference ▄
3045
peer-sbc
Configures peer Session Border Controller (SBC) addresses from where the P-CSCF/A-BG service can receive requests.
Product
SCM (P-CSCF, A-BG)
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > CSCF Service Configuration > Proxy-CSCF Configuration
configure > context context_name > cscf service service_name > proxy-cscf
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-cscf-service-proxy-cscf)#
Syntax
[ no ] peer-sbc ip_address
no
Removes the IP address of a peer SBC from this P-CSCF/A-BG service.
ip_address
Specifies the IP address of a peer SBC for this P-CSCF/A-BG service.
ip_address
is expressed in standard dotted decimal notation for IPv4 or colon notation for IPv6.
Usage
Use this command to specify peer Session Border Controller (SBC) addresses from where the P-CSCF/A-BG
service can receive requests.
service can receive requests.
Important:
This command must be entered multiple times if more than one SBC is present.
Example
The following commands identify three peer SBCs for a single P-CSCF/A-BG service:
peer-sbc 200.6.2.3
peer-sbc 200.6.2.10
peer-sbc 200.6.2.11
The following command removes the peer SBC with IP address
200.6.2.10
from the P-CSCF/A-BG
service:
no peer-sbc 200.6.2.10